If you have a windows laptop and you want to convert you windows laptop in to WiFi hotspot point, so that other users can connect to the internet via your Laptop WiFi using this Hotspot Technique. First of all connect your laptop with your router using Ethernet cable because we will use the WiFi as a Hotspot so it is very important that you are connected to the internet via Ethernet cable.There are six steps involve in this process
- Connect your laptop to the internet With Ethernet Cable
- Turn on Your Laptop WiFi
- Create Hotspot Point By Entering Command in CMD
- Start Hotspot Point By Entering Command in CMD
- Network Sharing Allowed Settings
- You are ready to use Hotspot
Steps.
STEP NO 1: Connect your laptop to the internet With Ethernet CableSTEP NO 2: Turn on Your Laptop WiFi
STEP NO 3: CREATE HOTSPOT POINT
To create Virtual Hotspot point go to the command prompt and enter this command incommand prompt.After entring command press enter
-------------------------------------------------------------------------------------------------
netsh wlan set hostednetwork mode=allow ssid=alihotspot key=alicomputertips
-------------------------------------------------------------------------------------------------
STEP NO 4: START HOTSPOT POINT
To start Virtual Hotspot point go to the command prompt and enter this command incommand prompt.After entring command press enter
-------------------------------------------------------------------------------------------------
netsh wlan start hostednetwork
-------------------------------------------------------------------------------------------------
STEP NO 5: ALLOWED NETWORK SHARING
Go to your network sharing settings and check on this option
" Allowed other network users to connect through this computer internet connection "
STEP NO 6: HOTSPOT IS READY TO USE
Connect with your newly created WiFi Hotspot by entering password which you set.
Post a Comment